When turning it on the set just clicks and the red power indicator light starts blinking twice every 1 or 2 seconds. No picture or just a flash of a black and white one. I found that if I unplug the power and wait a few hours, the set will come on normally. Before I take it apart does anyone have an idea of where the problem might be? Thanks.
Philips 27RF70 problem
Feb 27, 2006
2 Replies
Martin ha escrito:
if you are aware of the dangers of working inside tvs and have experience with a soldering iron, then start by resoldering any suspect joints on the main pcb especially near the hv line stage and power supply. If you haven't the experience or none of that made sense to you, do yourself a favour and leave it for someone who does!
-B
About 60 yrs of building and repairing electronic stuff including HV power supplies and building my own TV in 1949 has made me well aware...
Thanks for the pointer.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required