Hello all, I have a Mitsubishi CK35402 that has developed a no sound situation. When I was given this set I had to do a PIP bypass to get picture and then noticed that only one speaker was working normally and the other had hardly any volume and was distorted. Now time has passed and the sound started to take about 1 minute to come on after the set was powered up and today the sound is completely dead (both speakers) unless you turn it all the way up and then it's distorted. The audio outs on the back of the set are working normal. Is this a common problem with these sets and if so is there an easy repair? I currently have the set hooked to a mini amp and speakers but would prefer to repair it correctly or replace the set. Any help would be greatly welcomed.
Thanks Chris