Hi group!
I'm trying to find the book of words/pictures for this set. It belongs to my client who brought it from the US. Mits in Canada can't supply any docs so I'm waiting to hear from Mits in the US. Until then, Set starts to come on, green led on front lights, HV comes up, then after about 1-2 secs, shuts down. I don't have to remove AC to reset. I'm hoping to avoid transporting this set. Any thoughts? Thanks!
Press device and menu buttons for 5 sec simultaneously then count the flashes from LED for a 2 digit code. Post the results.
Leonard
Hello Leonard:
Thank you very much for you help with this.
I had the customer follow these instructions. The code seems to be "22". It sounds like it keeps repeating.
Kevin.
Look for open fuses in the convergence supplies (+/-24v lines). If open you likely have a bad output IC. If not, check C9A60 on power bd (470 pF 1KV).
Leonard
Leonard:
I had checked any fuses I could see the first time out but I missed F9A05 which is in the -24V line. It was open so I have ordered a convergence o/p IC. Thanks a lot for the help!!
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.