Making anti-static carpet spray?

May 28, 2006 26 Replies

Is there an easy way I could make my own anti-static carpet spray? The commercial product is often hard to find. Of course, pure water works for a short time, enough to repair one computer. I've tried adding fabric softener but it's too strongly scented to use this way.


"mc" wrote in news:PLqeg.64437$ snipped-for-privacy@bignews4.bellsouth.net:

Buy UNscented fabric softener.

Jim Yanik jyanik at kua.net

"mc" hath wroth:

See:

formatting link
The fabric softener keeps the static away. The ammonia keeps visitors, managers, nosey customers, and relatives away. If you smell the fabric softener, you're using way too much.

However, there's a catch. Fabric softener may be toxic. See:

formatting link
formatting link
formatting link
formatting link
formatting link
I'm not too sure if I totally believe all this.

Anyway, there are unscented and hopefully non-toxic vinegar based fabric softeners available:

formatting link
However, I don't think these will work as an anti-static spray. One way to check is to try it.

Jeff Liebermann jeffl@comix.santa-cruz.ca.us 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558

Do people agree, then, that fabric softener is the right stuff to use?

"mc" wrote in message news:PLqeg.64437$ snipped-for-privacy@bignews4.bellsouth.net... | Is there an easy way I could make my own anti-static carpet spray? The | commercial product is often hard to find. Of course, pure water works for a | short time, enough to repair one computer. I've tried adding fabric | softener but it's too strongly scented to use this way. | | I've used a teaspoon of salt in quart of warm water for anti-static carpet spray. Sprayed it with a plant mister. It works surprisingly well.

I used about a half teaspoon of fabric softener to one pint of water for years. If you use lukewarm water when you mix it, it will dilute better. Doesn't have to be warm to use though. This was in a number of large computer rooms including at a local college. Regards Lee in Toronto

Inviato da X-Privat.Org - Registrazione gratuita

formatting link

You can get it any good industrial cleaning supply company. Regards Lee in Toronto

Inviato da X-Privat.Org - Registrazione gratuita

formatting link

Thanks.

Downy "Free and Sensitive" fabric softener is odorless, but the bottle says, "Do not mix with water and store." Hmmm...

Yes. This is a town of 100,000, not a major city. The computer stores no longer have it. There is no electronics place except Radio Shack. There's a cleaning-supplies store I haven't checked that sells various kinds of carpet cleaning chemicals.

How long does it last? Does it do any good in dry weather (when it's needed most)?

If it will pick up any moisture from the air, it should stay conductive. Hmmm... Calcium chloride?

Google MSDSs; you'll find many are just surfactants. A bottle of the cheapest non-polyquat swimming pool algaecide would be an unscented lifetime supply (diluted with water).

Electrolube's data sheet gives no clue as to contents.

Graham

Don't they sell Static Guard clothes spray at your local grocery store?

"mc" wrote in message news:sJteg.36764$ snipped-for-privacy@bignews6.bellsouth.net... | | "Daniel A. Thomas" wrote in message | news: snipped-for-privacy@uni-berlin.de... | >

| > "mc" wrote in message | > news:PLqeg.64437$ snipped-for-privacy@bignews4.bellsouth.net... | > | Is there an easy way I could make my own anti-static carpet spray? The | > | commercial product is often hard to find. Of course, pure water works | > for a | > | short time, enough to repair one computer. I've tried adding fabric | > | softener but it's too strongly scented to use this way. | > | | > | | > I've used a teaspoon of salt in quart of warm water for anti-static | > carpet spray. Sprayed it with a plant mister. It works surprisingly | > well. | | How long does it last? Does it do any good in dry weather (when it's needed | most)? | | If it will pick up any moisture from the air, it should stay conductive. | Hmmm... Calcium chloride? | | I used regular table salt (NaCl). Seems to hold up fine with regular vacuuming but you'll need to reapply after steam cleaning or such. It works well even in low humidity.

Glycerol is often used as a humectant. I don't know if that would help in your case.

Mike.... yes, and salt is a powerful corrosive and I'm surprised that someone hasn't jumped in and commented on the folly of spraying salty mist in a computer room full of electronics! Regards Lee in Toronto

Inviato da X-Privat.Org - Registrazione gratuita

formatting link

Essentially any ionic surfactant should do the job. ;-)

Good Luck! Rich

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required