ipaq h2210

Nov 11, 2008 1 Replies

Hello, I have two ipaq with a failure. The first one cannot recognize neither a CF card nor a SD card. I suspect the supply to be dead. The second one had a issue with the touchscreen and a reboot issue. I try a lot of solution, for instance poweroff software but nothing can solve the issue. The only way to shutdown is to take the battery away. I also notice that the intern battery cell becomes discharging. Did anybody already have this issue ? What are the solutions in both cases ?



Thanks


Cordialement, Groeten, With Kind Regards

I don't have any specific solutions. I have 3 assorted ipaq units sitting in the office that can't be repaired. All have different problems, but a common cause. Intermittent cicruit board traces and possibly ball grid array (BGA) soldering problems. I've had no luck fixing either cause.

You might try a commercial repair service:

Jeff Liebermann jeffl@cruzio.com 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required