Hi all, just trying my luck: does anyone have a Data I/O mod. 201 (E)EPROM programmer with a firmware version at least 4.0? I need to program TMS2532A (21V VPP) and version 1.0 of the firmware only knows TMS2532 (25V VPP) so I've already lost a few of the -As :/ There's an EPROM inside the programmer, so if I'm lucky, the owner must have another way to read it other than the 201 :) Thanks in advance Frank
Data I/O 201 firmware
Feb 13, 2017
4 Replies
If all else fails, you might try contacting this guy:
formatting link
-- Adam
Check out the Yahoo DATA I/O mail list. There is a lot of support for all their products.
formatting link
John :-#)#
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Good suggestion! I subscribed to the mailing list so I can ask there :) Thanks Frank
except that it seems that only subscribing via email isn't working... :/
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required