A slight tap releases them but of course no good with continued CFL use unless uprating the relay. Previously stuck contacts occured 10 years or so back when the first 15W bulb blew, plasma arc current at failing switch-on presumably.
What is the switch on current of CFLs compared to conventional just out of interest ?
-- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on
Only proerly designed "power reed" contacts are suitable, a the normal reeds are not any good for currents at amp levels. Having said that, most CFL's have a limiting resistor input, so the input will not be more than a few amps.
Peter
Stick to the 15W filament, your chinese made CFL will only last 8 months before it overheats, blows your relay and dies, costing you 10 times the filament lamp. Surge current on a 22w CFL is 1.5A
On Thu, 24 Jul 2008 16:23:51 +0100, "N_Cook" put finger to keyboard and composed:
Here are several reverse eng "During start is peak collector current about 3 to 5 times bigger than during normal operation."
- Franc Zabkar
I was turning a lamp off then on above the sink which normally runs 24-7. There was a really big arc, but I don't remember if it was while turning off or on. I have 6 outside CFL's on one switch. Never heard any arc on that.
I understand that they can draw a lot more current near the end of their life.
greg
so
switch-on
of
Whatever technical stuff you ever wanted to know about CFLs on there
-- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on
Have something to add? Share your thoughts — no account required.
Ask the community — no account required