Compute Module 4 inside a standalone music maker

Nov 13, 2026 Last reply: 3 hours ago 4 Replies
Jump to replies (4)

When it is working, this is a portable instrument for making and performing music, needing no computer at all. A Raspberry Pi Compute Module 4 acts as the core application processor, running a custom-built Linux operating system. A full Linux music box you can just pick up and play is exactly the sort of thing I love seeing put together.



The construction looks tidy. The Compute Module mounts on a main carrier board, alongside a battery pack and speakers, all held in a plastic chassis and assembled with standard hand screwdrivers. Outside there are illuminated pads on a grid, rotary encoders and a jog dial, plus an internal rechargeable battery keeping the whole unit untethered. One cosmetic touch that stuck with me is a poster reading 'Ableton Move Oct 8'.



The development path is what stands out most. The earliest prototype was a wooden-cased unit with its circuit boards on show, and development footage covered silicone keypads and block diagram flowcharts. Before moving to the Compute Module for commercial production, the team ran performance benchmarks on ordinary consumer Raspberry Pi boards and used them to check that the software architecture held up. That strikes me as a sensible, low-risk way to prove the design before locking everything onto a carrier board.



CAD models of the chassis appeared on a laptop, and code editors running under Linux feature in the development footage, which paints a nice picture of hardware and software maturing side by side. The open question for me sits on the software side beyond the device: it runs its own custom-built Linux, and whether the full DAW will ever reach Linux is still unanswered.



Project by Raspberry Pi. Watch it on their YouTube channel:

formatting link


Curious about the early stage: did anything functional run on those ordinary consumer Raspberry Pi boards before the switch, or were they kept purely for measuring speed? I ask because jumping from consumer boards to a Compute Module on a carrier board seems like a big step to take on faith.

Choosing a Compute Module 4 over a full consumer board looks clever to me. It keeps everything self-contained on a carrier board inside the plastic chassis, and starting life as a wooden-cased prototype with exposed circuit boards shows how far the packaging came. The trade-off, in my view, is less flexibility once the module is locked in.

A variation I would love to see: publishing those block diagram flowcharts from the development footage. Anyone designing a standalone instrument around a Compute Module could compare their own software architecture against them, and it would show whether a custom-built Linux approach makes sense for smaller one-off projects too.

The maker has covered part of that: the ordinary consumer Raspberry Pi boards were used to benchmark performance and to validate the software architecture, and only afterwards did the team transition to the Compute Module for commercial production. So they were not purely for speed measurements; the boards also proved the software side.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required