How to implement pipeline in this case?
Hello.To improve the speed, I want to implement pipeline.But variables makeme sad...For example-- input: IN1,IN2 , output:OUTsignal A,B,C;process(clk)variable V_1,V_2,V_3;begin V_1 := IN1 A
14 discussions on ElectronDepot about the Xilinx XUPV2P: what owners asked, what went wrong, and what fixed it.
Hello.To improve the speed, I want to implement pipeline.But variables makeme sad...For example-- input: IN1,IN2 , output:OUTsignal A,B,C;process(clk)variable V_1,V_2,V_3;begin V_1 := IN1 A
According to The spartan 3e starter kits are available yet xilinx says they are not ?Alex
I've got a from Digilent (XUPV2P, [1]) with an Xilinx Virtex-II Pro (XC2VP30, to be exact). I've been reading up and it seemsthat most say it's impossible to implement SerialATA with this, evenwith additional logic? My plan was to use...
Hi,I am doing stuff with Displays. The data rate is about 3 gigabits/s for the pixels. I am thinking about using the XUPV2P from digilent for this application.Since I would have to read and write at the same time, I would need a data rate...
Is it possible for a hobbiest to obtain the board for USD 300? Anydownside getting this board?Regards,John
Hi,I will do some research on video/image processing on FPGA. I will design VHDL codes for some video/image processing algorithms. I needs a FPGA development board with a big FPGA chip on it. I also hope it can be connected with a digital...