26 discussions on ElectronDepot about the HP 8566B: what owners asked, what went wrong, and what fixed it.
Moin!Bräuchte mal ne Empfehlung fürn Spekki:- Frequenzbereich so bis 2 GHz wär schon ok. Klar wärs auch schön, gleich zu sehen, wenn weiter oben was schwingt, aber das soll nicht das entscheidende Kriterium sein.- Tracking-Generator-...
Sehr geehrter Herr Bartels,wann kann man denn endlich mit einen Update zur Firmware f=FCr die V4Ger=E4te rechnen?Es sind ja noch eine nicht unerhebliche Menge an wirklich _b=F6sen_Fehlern vorhanden.Seit nunmehr 5 Monaten warte ich auf die...
I'm designing a test board for a laser controller. Incoming signals, fast 5 volt pulses, will need to get routed to scopes, counters, and some other stuff. It will be kind a maze of connectors and traces and probably relays; it's hard to...
I'm working on an interesting project for a biotech customer, and I could use some wisdom from the assembled multitude. They're building a scanning fluorescence microscope that scans several lines at once with a single photomultiplier,...
Amazon has a surprising amount of electronic components for sale. Prices can be a fraction of Digikey. I wouldn't trust these for production, but they look interesting for experimenting. And I can just click and get them in a day or two,...
Gentlemen, I just fired up a spectrum analyser for the first time in many years and am horrified at the noise I'm picking up from the mains. Even with every wall wart in the house turned off it's still there and there's nothing I can do...