11 discussions on ElectronDepot about the Atmel AT91SAM: what owners asked, what went wrong, and what fixed it.
Moin!Das Thema 8-Bit Mikrocontroller habe ich in den letzten Jahrenausgiebig bearbeitet. Jetzt reizt es mich auf ARM umzusteigen,schaue jedoch an vielen Stellen noch nicht so ganz durch.Den Ansatz einen ARM7 oder M3 einfach als...
I am looking for a PIC or Atmel Micro that has 4-independentlcontrolled PWM channels of about 10-bit resolution . The frequnenccan be the same but I need simultaneous 0-100% duty cycle control oeach channel independently . The max PWM...
I am trying to design a new board based on the AT91SAM9260 processorand had a few questions :- Any idea if the DP83848CVV Phyter from National Semi would work withthis proc. (it supports both RMII and MII)- I am not clear as to point of...
Hi,I've recently started development with a Philips LPC2103. I know Atmel has a site, which I found useful for AT91SAM stuff. I'm looking for suggestions or recommendations on websites/forums that discuss using the LPC21xx parts. I did...
Hi folks,I've been using 8-bit micros (AVR) programming in assembler, butfor a new project I'll be handling a fairly complex interface,and will also need to do some 26 bit math (with mult/div) tocalculate coefficients to send to a DSP. I...
Hallo,Nach ein paar Jahren mit AVRs (Hobby-Projekte mit C) und PICs (Berufs-Projekte mit ASM) möchte ich mich etwas weiterentwickeln und suche daher eine Neue Plattform mit folgenden Anforderungen für die aktuelle Anwendung:- USB on chip...