Embedded Linux

booting linux on arm problem

My boot code is located at addr 0x0 and kernel at 0x8000. The boot code initialize uart and print out OK on a terminal...

9 comments posted 18yrs

posted by camwwang

9 comments posted 18yrs posted by camwwang

cross-compile toolchain

hello, Is there a cross-compile toolchain based on dietlibc or newlib like buildroot based on uClibc or Crosstool based...

0 comments posted 18yrs

posted by fabien.fb

0 comments posted 18yrs posted by fabien.fb

crosstools-0.43 failing to build gcc-4.1.0

I'm trying to build gcc 4.1.0 crosscompiler for arm. It fails with: crosstool: binutils built ok + echo 'Install glibc...

0 comments posted 18yrs

posted by yan

0 comments posted 18yrs posted by yan

PLL and uClinux

Hello everybody, just a newbie question : is it possible to change the PLL while uClinux is loaded (for example, to pla...

0 comments posted 18yrs

posted by ""freezed\"

0 comments posted 18yrs posted by ""freezed\"

Linux Target Image Builder (ltib) configuration problem

I'm working on a custom board that requries a change to the memory map as laid out for a supported board (mcf5485evb)....

3 comments posted 18yrs

posted by jkimble

3 comments posted 18yrs posted by jkimble

RO root file system

hello group, I have a simple issue. I am currently developing an embedded linux system, based on the following hardware...

1 comments posted 18yrs

posted by VASILI3000

1 comments posted 18yrs posted by VASILI3000

Selecting embedded Linux for a new medical device project (LONG)

Hi, I've just begun working on a new project for a medical device, and I'm in the early stages of deciding which RTOS w...

14 comments posted 18yrs

posted by PleaseReplyTo

14 comments posted 18yrs posted by PleaseReplyTo

Trouble porting boot loader for mcf548x (won't run OS image...)

I am attempting to port colilo (the boot loader included in the BSP provlded by Freescale for the 5484/5485 eval board)...

1 comments posted 18yrs

posted by jkimble

1 comments posted 18yrs posted by jkimble

Commercial embedded distro s home made Linux

I'm in charge to study how can I pass a custom board running a custom BSP and psos to a Linux kernel with RTOS capabili...

0 comments posted 18yrs

posted by fabien.fb

0 comments posted 18yrs posted by fabien.fb

Is it possible to save all the commands typed in a shell into a log file?

I use "$ history" to get the last few commands typed in the shell window, but it is not so convenient, just wondering w...

11 comments posted 18yrs

posted by camwwang

11 comments posted 18yrs posted by camwwang

What are the steps to do for Vxworks 5.5 porting to Vxworks 6.2

Hi All, I am new to Vxworks porting . Can anybody sugget me to How to the do porting .

3 comments posted 18yrs

posted by nagidivenu

3 comments posted 18yrs posted by nagidivenu

{Commercial} SafeSquid "SPEED-BOOSTER" 4.2.0 Released

Hello All, SafeSquid "SPEED-BOOSTER" 4.2.0 for Linux has been released. Increasing throughout, is the key goals of 4.2....

0 comments posted 18yrs

posted by httpproxy

0 comments posted 18yrs posted by httpproxy

embedded baord with RS-485 and ethernet

hey i am looking to purchase a simple development board that has an ethernet port and an RS485 socket. can anyone advise...

5 comments posted 18yrs

posted by roland

5 comments posted 18yrs posted by roland

problm regarding loading user application program in core B

Hi all, Sir currently i am working in Blackfin 561 in uclinux environment.I am trying to load user application program...

0 comments posted 18yrs

posted by mahi.ithink

0 comments posted 18yrs posted by mahi.ithink

usbserial on ARM

I have an ARM based board with usb interface. To use the usb interface I use the following commands: > insmod usbserial...

4 comments posted 18yrs

posted by ghiggia

4 comments posted 18yrs posted by ghiggia