Do you have a question? Post it now! No Registration Necessary
- Vasudev Mulchandani
April 26, 2004, 1:32 pm

Hello there
Facing a strange problem
We built linux kernel, downloaded into RAM and the kernel
executes and all messages being displayed on console perfectly.
However, after successful booting, the kernel displays login
prompt
machine-name login:
However, after that the console seems to be dead. The JTAG
window shows that the target is up and running and the LED
[supposed to glow] are glowing fine as well.
Not sure what the problem could be.
The inittab file sounds good.
-------------------------------------------------------------
::sysinit:/etc/rcS
::respawn:/sbin/getty 115200 ttySC1
::respawn:/sbin/getty 115200 console
::restart:/sbin/init
::shutdown:/etc/rcE
--------------------------------------------------------------
Any help ???
Thanks a ton
Vasu
Facing a strange problem
We built linux kernel, downloaded into RAM and the kernel
executes and all messages being displayed on console perfectly.
However, after successful booting, the kernel displays login
prompt
machine-name login:
However, after that the console seems to be dead. The JTAG
window shows that the target is up and running and the LED
[supposed to glow] are glowing fine as well.
Not sure what the problem could be.
The inittab file sounds good.
-------------------------------------------------------------
::sysinit:/etc/rcS
::respawn:/sbin/getty 115200 ttySC1
::respawn:/sbin/getty 115200 console
::restart:/sbin/init
::shutdown:/etc/rcE
--------------------------------------------------------------
Any help ???
Thanks a ton
Vasu
Site Timeline
- » rtlinux
- — Next thread in » Embedded Linux
-
- » rtirq-patch on Geode GX1 ?
- — Previous thread in » Embedded Linux
-
- » Crosscompiling for ARM: reloc type R_ARM_ABS32 is not supported for PIC - ...
- — Newest thread in » Embedded Linux
-
- » Martwa płyta PC retro - od czego zacząć?
- — The site's Newest Thread. Posted in » Electronics (Polish)
-