Assuming the desired bus speed is Conventional PCI @ 33MHz via PCI-X slot, does one have to assert and then deassert PCIXCAP the same way as M66EN?
Both pins are grounded.
Is there anything else that must be done to achieve PCI Mode @ 33MHz?
Assuming the desired bus speed is Conventional PCI @ 33MHz via PCI-X slot, does one have to assert and then deassert PCIXCAP the same way as M66EN?
Both pins are grounded.
Is there anything else that must be done to achieve PCI Mode @ 33MHz?
Have something to add? Share your thoughts — no account required.
Ask the community — no account required