Need help in Flash simulation module.

Sep 23, 2005 1 Replies

I'm designing a flash controller, target is ATMEL AT49BV160C. It's a 16-megbit (1M x 16) 3-volt Only Flash Memory. Here's the datasheet :

formatting link


---- I use Xilinx FPGA (Spartan 3, XC3S1000 FG456 -4) for the controller, but i cannot find the corresponding Simulation Model (in VHDL) to do the simulation job.



Can somebody give me some hints or useful links or especially the similiar Simulation Model than can simulate the ATMEL AT49BV160C flash action.



Best regards & Thanks!



I'm designing a flash controller, target is ATMEL AT49BV160C. It's a 16-megbit (1M x 16) 3-volt Only Flash Memory. Here's the datasheet :

formatting link

---- I use Xilinx FPGA (Spartan 3, XC3S1000 FG456 -4) for the controller, but i cannot find the corresponding Simulation Model (in VHDL) to do the simulation job.

Can somebody give me some hints or useful links or especially the similiar Simulation Model than can simulate the ATMEL AT49BV160C flash action.

Best regards & Thanks!

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required