Hi, I am looking for an FPGA board with preferably a Xilinx FPGA (Spartan3 or Virtex series) with 500k to 1 million gates capacity. The board should have any or all of the following interfaces.
USB 2.0 (preferred) Serial Port Ethernet
The board must have a single or dual channel ADC with sampling speed in the range of 10-20 MS/s. ADC resolution should be somwhere around12-16 bits.
In addition to all mentioned above, the board must have 32-64 MBytes of on-board memory (SSRAM is preferred).
Thanks in advance