Got an entry level embedded role interview coming up in about a week and they mentioned thier platform talks to programmable logic, like software running on an ARM core reading and writing to custom hardware. I've got C and Linux covered okay, sockets too, but the software-to-fabric side is a total blank for me and I don't own any dev board. So far my plan is to use an emulator to fake the ARM side and just learn the concepts, stuff like memory mapped registers and how software pokes hardware. I keep seeing Verilator mentioned as a way to simulate logic on a normal PC, but I've never used it and I'm not sure if that's overkill for what I need. Has anyone here learned this stuff purely through simulation? Is it realistic to get a basic understanding in five days or am I wasting my time? Any free resources or simple project ideas would be great, honestly just want to walk in there not sounding clueless when they ask about it.
How do I learn FPGA software interaction with no board?
Nov 08, 2026
Last reply: 1 week ago
4 Replies
First reply
I've done this from the software side for years on Zynq-class parts, and here's the honest take: from a running Linux app, talking to FPGA fabric is literally just reading and writing addresses in memory. The hardware team maps their custom logic into the processor's address…
Read the full replyI've done this from the software side for years on Zynq-class parts, and here's the honest take: from a running Linux app, talking to FPGA fabric is literally just reading and writing addresses in memory. The hardware team maps their custom logic into the processor's address space, and you open /dev/mem or a UIO device, mmap it, and poke values with volatile pointers. That's it. If you can do that in five minutes on your QEMU setup with a fake address, you've demonstrated 90% of what they'd ask an entry-level software person.
So don't panic about AXI. The bus protocol underneath is the hardware engineer's problem. You just need to know the vocabulary: the fabric looks like memory-mapped registers, reads and writes go over AXI, and there might be interrupts when the hardware has data ready. Being able to say that in an interview, plus knowing what a register map and a datasheet are, puts you ahead of most entry candidates. Verilator is genuinely useful but it teaches you the wrong half for this role. It simulates the logic side, so you'd be writing RTL and testbenches, which is the FPGA engineer's job, not yours. If you want a toy project anyway, a simple simulated peripheral with a few registers you write from a C program is doable in a couple evenings. But your time is better spent elsewhere. What I'd actualy do with your five days: write a small C program that mmaps a fake peripheral and drives it, maybe with a background 'hardware' thread acting like registers that change over time, and handle an interrupt-style signal. Also skim one of the free online Zynq book PDFs, the first few chapters cover exactly how the ARM cores and the programmable logic share a chip and talk to each other. And learn to say honestly: 'I know the software side is memory-mapped IO, I haven't touched real hardware yet but I understand the model.' That answer lands fine at entry level.
Following this since I'm in a sort of similar spot, except I'm the hardware side trying to fake the software. I've been running a simple simulation with a testbench printing register values over a fake bus, and honestly even that was enugh for me to stop being confused about who reads and writes what. Question for the software folks here: when your app writes a config register, does the hardware usually ack it somehow or do you just trust the write landed? I keep seeing both patterns in example code and it's never explained. Also second whoever said skim the vendor docs, the block diagrams alone made things click for me more than any tutorial.
Not sure I buy the 'Verilator teaches the wrong half' arguement. When I interviewed for a similar role, the thing that actually got me through was having poked a fake peripheral in a simulator, because I could explain what happens on the other side of the register write. The hardware team in that job cared a lot that software didn't hang the bus or ignore timing constraints. Knowing only the mmap side leaves you guessing why your write disappeared. Two evenings on a toy simulation buys you that other half of the conversation.
I did the fake peripheral thing last year for a job where I'd be talking to some custom board, and the thing that actually helped me most was drawing it out on paper first. Like, a little box for the processor, a little box for the programmable part, arrows for where the reads and writes go, and one arrow for when the hardware says 'hey, data is ready'. I kept mixing up which side waits and which side pokes untill I drew it. The interview went fine, mostly they wanted to know I understood that the software side just sees addresses.
The part that still confuses me is the timing though. Does the software side actually know anything about how fast the logic runs, or does it just write and hope it's done? Like if the hardware needs a hundred clock ticks to finish something, how does the program know when to check back?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required