Embedded Programming

  1. Home
  2. Embedded Programming
16393 Threads Posts
to

Worth reading in Embedded Programming

which MCU to pick

Hi Folk After a quick scan to look for a MCU for a particular task, I have two specific MCUs in mind, they are: Atmel A...
7 comments posted 22yrs
posted by calvin_chan
7 comments posted 22yrs posted by calvin_chan

Embedded Linux on ARM Platform

Hi, I have ARM Platform evaluation board (ARM integrator/CP & ARM 920T Processor) in my office. I am a newbie in this a...
1 comments posted 22yrs
posted by buzzberry
1 comments posted 22yrs posted by buzzberry

a good DVR SoC?

I have a project about DVR, and I found a solution using PNX1300, does anyone can give me some comments about that such...
0 comments posted 22yrs
posted by danny.lu
0 comments posted 22yrs posted by danny.lu

Minimalist PC Needed for embedded App

Hi, Im looking for a tiny pc for an embedded app. The only requirements I need, is that it be 1) 486 compatable, 2) Has...
6 comments posted 22yrs
posted by benn686
6 comments posted 22yrs posted by benn686

ANN: ESF Dual Blackfin Development System

EmINENT Microsystems provides developers an easy to use Blackfin development system to speed all stages of your project...
0 comments posted 22yrs
posted by j.laws
0 comments posted 22yrs posted by j.laws

Quick Q regarding Ethernet

I'm starting to look at building an ethernet switch for a specialist application that precludes using an off-the-shelf...
6 comments posted 22yrs
posted by tmb
6 comments posted 22yrs posted by tmb

5V board in a 3.3V PCI slot

Hi, I have a problem with a Dialogic board "DM/IP301-1e1-PCI". I installed that board in a Piv 1.6Ghz Mainboard D845WN...
3 comments posted 22yrs
posted by ikadabuchi
3 comments posted 22yrs posted by ikadabuchi

ATmega128L programming problem

Dear all, This is my first time to use ATmeg128L (3.3V version) and I'm having problem with programming it via SPI. I'm...
1 comments posted 22yrs
posted by danhan
1 comments posted 22yrs posted by danhan

14 Segment "startburst" alpha LCDs

Hi All, I'm working on a highly cost sensitive product that will see moderate production volume. I know these two don't...
0 comments posted 22yrs
posted by U_JMood
0 comments posted 22yrs posted by U_JMood

ANN: Low cost & high speed JTAG interface

Hi all, "Save your debug time using Raven JTAG interface" Raven JTAG interface is 5x faster than the popular Wiggler em...
0 comments posted 22yrs
posted by laurent.gauch
0 comments posted 22yrs posted by laurent.gauch

Macintosh OS9 FTDI drivers?

Hi all, I'm trying to get a product working that uses the FTDI FT232BM chipset to get USR/Serial translation. The devic...
3 comments posted 22yrs
posted by dlc
3 comments posted 22yrs posted by dlc

Use fast driver with old slow bus?

I want to find proper driver chips for an old bus (Q22Bus). The protocol says: rise/fall times must be no faster than 1...
4 comments posted 22yrs
posted by vax3900
4 comments posted 22yrs posted by vax3900

DS80C400: PCEs and CEs?

Perhaps the difference between these signals is too subtle for me but essentially the above device has 8 chip enables C...
3 comments posted 22yrs
posted by Fred
3 comments posted 22yrs posted by Fred

best processor compatible with 80C52FA?

I need to upgrade the cpu in a system to get more memory, speed and any other features that might be availble. The repl...
2 comments posted 22yrs
posted by wj5437
2 comments posted 22yrs posted by wj5437