Embedded Programming

Architecture question

Hi, I've 3 questions about my Infineon TriCore microcontroller which is described by Infineon as "32-bit microcontrolle...

0 comments posted 18yrs

posted by plfriko

0 comments posted 18yrs posted by plfriko

Ethernet driver and BSP for DM9008 on 5307C3

Hello, I'm trying to port uC-OS2 and its TCP-IP stack on a Coldfire 5307C3 EB This board has a Davicom DM9008 ethernet...

0 comments posted 18yrs

posted by xavier.savatier

0 comments posted 18yrs posted by xavier.savatier

interfacing with system bus

Hi , I'm trying to communicate ith an IC from Infineon with MCP8548 through the system bus. In the datasheet of Serocco...

0 comments posted 18yrs

posted by tugrul.guclu

0 comments posted 18yrs posted by tugrul.guclu

pic16f627 with different baudrates

Hi! I am a newbee of using PIC USART and internal clock. I am developing a program that will send a data to an instrume...

2 comments posted 18yrs

posted by rf_orcullo

2 comments posted 18yrs posted by rf_orcullo

Problems on Quad UART TL16C554A

We are trying to use the TL16C554A quad uart The transmission rate we are interested is quite low: 4800bps We used the...

1 comments posted 18yrs

posted by bonaiuto

1 comments posted 18yrs posted by bonaiuto

Endianess problem

Hi, I am writing a driver for a ethernet controller. The controller i connected to the io memory and expects data to be...

4 comments posted 18yrs

posted by sidbharij

4 comments posted 18yrs posted by sidbharij

PROBLEM with MSP430F2121 and BSL

Hi, I'm new here. I'm italian and so my english is not very good...pardon! I have need to program MSP430F2121 (28 pin,...

2 comments posted 18yrs

posted by federico.rd

2 comments posted 18yrs posted by federico.rd

bcopy

Hi, I find that the stackpointer is pointing to 'bcopy' at the time of crash of my VxWorks application. This was found...

2 comments posted 18yrs

posted by karthikbalaguru79

2 comments posted 18yrs posted by karthikbalaguru79

Accessing external I2C EEPROM with Cypress EZ-USB dev kit

Hi, I have the Cypress FX2LP development kit, and according to the manual, I can select either large EEPROM(Microchip 2...

1 comments posted 18yrs

posted by goister

1 comments posted 18yrs posted by goister

"signaling" interrupts in WinCE 5.0

I am porting a touch-panel driver to a WinCE 5.0 device. It is interrupt driven, using the SYSINTER_TOUCH & SYSINTR_TOU...

0 comments posted 18yrs

posted by usenet

0 comments posted 18yrs posted by usenet

Windows CE training courses?

Can anybody recommend a good course for Windows CE embedded? I am interested in system internals, OAL/driver developmen...

3 comments posted 18yrs

posted by usenet

3 comments posted 18yrs posted by usenet

Licensing Fonts for Graphic LCD???

Do you have to license a font when using a graphic LCD that has no embedded fonts? If so, how much $$$ ? From who?

14 comments posted 18yrs

posted by jlennon

14 comments posted 18yrs posted by jlennon

Electrical schematic entry software / Subcontracting cabling

Slightly off-topic maybe: Our company has a recuring problem : subsystems send out for cabling at subcontractors are of...

13 comments posted 18yrs

posted by stijnvanorbeek

13 comments posted 18yrs posted by stijnvanorbeek

STR9 COMSTICK is not getting recognized in WinXP-SP2

Hi, Sorry about posting in this forum -- if this not right forum(please let mw know correct forum if any) I bought one...

1 comments posted 18yrs

posted by sgorti

1 comments posted 18yrs posted by sgorti

PDIUSBD12 USB odyssey,help

Hi to all in the aim of studying USBprotocol i built a little board including a 9s12 microcontroller and a PDIUSBD12 pa...

0 comments posted 18yrs

posted by bliscachiocciolinatiscali.it

0 comments posted 18yrs posted by bliscachiocciolinatiscali.it