I want to find low cost Cortex-M3 develop tool under $150 for learning purpose. It better has ethernet interface and ADC.
Cortex-M3 develop tool under $150?
Aug 16, 2010
5 Replies
First reply
Check TI's Stellarus microprocessor -- they have a very affordable eval board, that comes with free tools. If you're looking for a stand-alone JTAG debugger, look on the SparkFun website, and dig around for information on the OpenOCD project.
Read the full reply
formatting link
Rob Gaddi, Highland Technology
Email address is currently out of order
Check TI's Stellarus microprocessor -- they have a very affordable eval board, that comes with free tools.
If you're looking for a stand-alone JTAG debugger, look on the SparkFun website, and dig around for information on the OpenOCD project.
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" was written for you.
See details at http://www.wescottdesign.com/actfes/actfes.html
formatting link
-p
Paul Gotch
--------------------------------------------------------------------
There are also details of the LPCXpresso boards at the board designer's (Embedded Artists) site:
formatting link
They sell a 'base board' with additional peripherals which can be used with either their LPC1343 or their LPC1768 Cortex-M3 boards, or ARM's 'mbed' LPC1768 board.
Regards, Chris Burrows Astrobe: ARM Oberon-07 Development System
formatting link
formatting link
No ethernet interface but there's probably an arduino stamp that could be used (not a trivial task doing the software port).
Nial.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required