1. Home
  2. Embedded Programming
  3. ANN: Simple LPC210x prototyping PCB

ANN: Simple LPC210x prototyping PCB

I'm working on a simple prototyping PCB for the new Philips LPC210x ARM chips. Details of the draft schematic are here:

http:/

formatting link

I'll be incorporating a sizeable breadboarding area.

I'll complete the PCB layout when I actually get my hands on a couple of chips, hopefully in a few days. I should be able to get away with a cheap double-sided PCB, as all the high speed stuff is inside the chip.

I'll be putting it into the public domain and making the PCB design files available to anyone who wants them.

Leon

Reply to
Leon Heller
Loading thread data ...

Hello Leon - Great to hear! Can you provide the board with components? I can solder it myself if needed. What do you think will it costs? I'm from Germany. Cheers - Henry

Leon Heller schrieb in Nachricht ...

Reply to
Henry

I've been quoted 5.56 GBP for the LPC2104 by Eurodis. PCBs could be as low as 5 GBP for a small batch. Total cost of parts (including PCB will be about 15 GBP, I should think (guesstimate).

I've just found the PCB footprint details for the LPC210x on the Philips web site, so I can get on with the PCB design. I'll make the pads a bit longer for easy hand soldering.

Leon

Leon

Reply to
Leon Heller

In article , Leon Heller writes

It will probably be cheaper to buy the Keil/Philips arm kit. Many places are producing good inexpensive ARM kits.

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org

formatting link
\/\/ \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

Reply to
Chris Hills

I see, a senior pcb layouter :) I will buy one pcb if ready... Cheers - Henry

Leon Heller schrieb in Nachricht ...

Reply to
Henry

I don't think anyone makes one for the LPC210x.

Leon

Reply to
Leon Heller

"Leon Heller" wrote in news:3f92e893$0$6630$ snipped-for-privacy@news.dial.pipex.com...

formatting link
formatting link

-- PabloBleyerKocik / pbleyer /"Mes pensées, ce sont mes catins." @embedded.cl /- Le Neveu de Rameau, Denis Diderot (1762)

Reply to
Pablo Bleyer Kocik

In article , Leon Heller writes

wait 2 weeks....

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org

formatting link
\/\/ \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

Reply to
Chris Hills

I would be happy if Chris and Leon can work together...

- Henry

Chris Hills schrieb in Nachricht ...

Reply to
Henry

I've just found that Ashling and Nohau make kits, but they are $200 or so. Philips is making one for about $50, apparently.

Leon

Reply to
Leon Heller

Hi, I can confirm that from an Ashling POV. For a low-cost evaluation kit based on the Philips LPC2xxxx family check:

formatting link

The ASK-2100 kit costs 250 $s which includes an LPC2100 evaluation board with on-board USB ICE. The kit also includes a graphical IDE/Debugger and pre-built GNU ARM tools with Cygwin. The IDE/Debugger are time limited to 45-days, there are no contraints on the GNU tools. Also included are GNU example programs that run on the board. Contact me if you need further info: snipped-for-privacy@ashling.com.NOSPAM

Reply to
HG

In article , Leon Heller writes

Unfortunately not. It is a little more expensive than that.

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org

formatting link
\/\/ \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

Reply to
Chris Hills

In article , HG writes

or if you are UK based. snipped-for-privacy@hitex.co.uk who can also supply them.

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org

formatting link
\/\/ \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

Reply to
Chris Hills

In article , Henry writes

There will be a Keil/Philips 2114 board in the next couple of weeks.

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org

formatting link
\/\/ \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

Reply to
Chris Hills

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.