TV Sony Averiada y pardadeos de la lucecita roja de standby

como ya os comente hace unos dias tengo una Sony KV-29C5E que le cuesta arrancar la imagen en frio bastante, unos 30 o 40 segundos, aunque me comento Jeroni Paul por aquí lo de subir la tensión G2, de momento no la he tocado hasta que me falle más y me gustaria a ver si puedo saber si es ese el fallo.

he notado que la lucecita roja del Standby parpadea de 5 en 5 veces, ¿sabeis si eso puede indicar un error específico? ¿al igual que lo hacen las placas base de ordenador que no arranca con los pitidos para saber el error?

si es asi, me imagino que los codigos de error mas o menos seran standar para todas las sony al menos, ¿alguien sabe cual podria ser este?

Reply to
Javier
Loading thread data ...

Buscando un poco he encontrado esto, que creo que es lo que buscaba:

formatting link

Aunque no se si debo mirar el error de 4 o de 5 parpadeos ¿?

Cuando está encendida la tele hace 5 parpadeos seguidos y un paron sin encenderse: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Y cuando la tv está apagada en Standby hace 4 parpadeos y en el 5º se queda encendida la luz unos segundos _ _ _ _ ________ _ _ _ _ _________ _ _ _ _ ________ _ _ _ _ ________

en esa web pone:

- Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505

- Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the Cboard, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

"Javier" escribió en el mensaje news:el9maj$np4$ snipped-for-privacy@nsnmpen2-gest.nuria.telefonica-data.net...

todas las sony al menos,

Reply to
Javier

Javier ha escrit:

horizontal line then the video signal muted. Check IC1509,

No es tu caso.

cator blinks for about 30 seconds then goes to the

ut, Q705, 732, 761 and other components on the Cboard, also

nking, try turning up screen slightly.

Vaya parece que te dan la misma sugerencia, subir la tensi=F3n G2 (lo que se llama tensi=F3n Screen).

Reply to
Jeroni Paul

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.