Source for Switches

For my project I need some switches that I would like to have semi- decorative. I will need about 10 switches in total.

  1. A master on/off switch. I'd like it to be a different color. Might need to switch two circuits at once. 9V, up to 3AMPs.

  1. About 10 on/off switches. 9V , up to .5 amps.

  2. Two sliding switches of the rheostat variety.

I would like for these switches to:

A. be semi-decorative. B. match C. Be relatively inexpensive. D. Small (ie about the size of an on/switch for a typical modem)

Reply to
Ivan Mascovich
Loading thread data ...

formatting link
formatting link
formatting link
formatting link
formatting link
formatting link
&c

--
Rich Webb   Norfolk, VA
Reply to
Rich Webb

Rich Webb wrote in news: snipped-for-privacy@4ax.com:

Thanks, but I've been to all of those (excdept bg) but I can't interpret the information to translate to the my needs. In short, under what name should I be searching?

e.g

Digikey's catalog has no "rheostat category". There are Rheostat resistors. Wirewound rhoestat resistors. Digital rheostat potentiometers.

50 and 12.5 Watt, twist type rheostats.

I've got to believe with all the parts Digikey has they have what I need....but where?

Reply to
Ivan Mascovich

Jasen Betts wrote in news: snipped-for-privacy@news.compass.net.nz:

I think plastic rockers would be more appropriate in my application. I'm afraid dials would take up too much space. The reason for desiring a slider is that one could instantly look at it and see the position.

Do you know what a rheostat slider would be called in these catalogs?

Reply to
Flavius Vespasianus

Hard to tell. A limitation of the medium, I'm afraid, trying to interpret what you have visualized.

Try Digikey or one of the other large sites to get an idea of what manufacturers have product lines that hit somewhere near what you're trying to find. Then hop over to the manufacturer's web site. They often do a better job of presenting the product line than do the general retailers who, if they don't include the kitchen sink, do at least have washers. [ducks head, runs for cover]

--
Rich Webb   Norfolk, VA
Reply to
Rich Webb

--
Slide pot.

http://www.digikey.com/scripts/DkSearch/dksus.dll?Criteria?Ref=192287&Site=US&Cat=33031207
Reply to
John Fields

do you want chromed toggle switches, or small plastic rocker switches. (I have two modems with different switch styles)

you'll probably pay around a buck each either way, maybe a little less on the rockers.

sliders are harder (harder to mount for a start, OTOH if rotary is OK chromed knobs are easily had.

BTW

for your plugs, you could use a "banana" plug/souket for the ground and the mini-din discussed earlier carry the power into each lighting circuit

the two side-by-side woulde be under your 1" limit or you could put them different pillars.

Bye. Jasen

Reply to
Jasen Betts

--
Learn to use Google.
Reply to
John Fields

probably "slide potentiometer"

I mainly use a paper catalogue and it doesn't have any.

last time I asked at a hobbyiist electronics store they said they didn't stock any as there were too many variations (length, mounting style....)

Bye. Jasen

Reply to
Jasen Betts

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.