Dear,
I want to make PS with 24 Volts regulated 50Watts for my PLC's. Please help me, how to cretae it, i beg you all to give me some information about that circuit, schematic, components list completely. Buying PS for CPM2B is so expesive to me in Indonesia at least $28 :(
Thank's 4 you all,
Adi P.Nugroho Salatiga-Indonesia
Hi, Mr. Nugroho. If we're talking about the Omron CPM2B, you'll also need to look at 20A surge capability on turn-on, which might be something of an additional problem. Your 24VDC supply has a specification of 24V +10%/-15%. And the main board has a rated current of 20 watts (a little more than 3/4A).
Altogether, I don't believe you're going to make a power supply for less than the purchase price. However, you should be able to beat the cost by purchasing a surplus 24VDC switching power supply that is capable of supplying more than three amps, and has a minimum current load zero or less than half an amp. I don't know about local suppliers, but you can easily obtain a surplus power supply which will do the job for quite a bit less than $28 USD.
If you have further questions about your Omron controller, you might want to query sci.engr.control.
Good luck Chris
Have something to add? Share your thoughts — no account required.
Ask the community — no account required