Download of Multisim components?

Does anyone know of a site where I can download free Multisim component models? Specifically, I need the model for a 1 Farad regular capacitor and a 500 mF regular capacitor. Thanks in advance for all replies!

Steve O.

"Spying On The College Of Your Choice" -- How to pick the college that is the Best Match for a high school student's needs.

formatting link

Reply to
Steven O.
Loading thread data ...

Ho humm...These models are trivially simple. For the 1F cap, put a resister in series with a standard cap and your done. This might be relatively large if its a super cap. What value of resistance? What does the manufacture say is in internal resistance of its cap? Ho hummm...

For the 500uf, again use a series resister equal to the esr that the manufacture specifies for the part. Typically 10mohm-100mohm for something of that size. You can include a series inductance if you like. Use 20nh/inch for the length of the leads.

Kevin Aylward snipped-for-privacy@anasoft.co.uk

formatting link
SuperSpice, a very affordable Mixed-Mode Windows Simulator with Schematic Capture, Waveform Display, FFT's and Filter Design.

"There are none more ignorant and useless,than they that seek answers on their knees, with their eyes closed"

Reply to
Kevin Aylward

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.