Does anyone know of a site where I can download free Multisim component models? Specifically, I need the model for a 1 Farad regular capacitor and a 500 mF regular capacitor. Thanks in advance for all replies!
"Spying On The College Of Your Choice" -- How to pick the college that is the Best Match for a high school student's needs.
Ho humm...These models are trivially simple. For the 1F cap, put a resister in series with a standard cap and your done. This might be relatively large if its a super cap. What value of resistance? What does the manufacture say is in internal resistance of its cap? Ho hummm...
For the 500uf, again use a series resister equal to the esr that the manufacture specifies for the part. Typically 10mohm-100mohm for something of that size. You can include a series inductance if you like. Use 20nh/inch for the length of the leads.
Kevin Aylward email@example.com
SuperSpice, a very affordable Mixed-Mode Windows Simulator with Schematic Capture, Waveform Display, FFT's and Filter Design.
"There are none more ignorant and useless,than they that seek answers on their knees, with their eyes closed"