Aquarium Lights Problems

Thanks for the info, the web site is great! I will be looking for a couple of starters tomorrow. Again thanks for the info and the web site as I have marked it for future reference.

the

in

light

tip,

looks as

some

holds

DWW,

series

excessive

is

From your description, the blackened thing sounds like a glow tube starter and the staple thing sounds like a capacitor. But, it wouldn't be in series with the lamp, but across the lamp connected to 1 set of the filament pins at each end.

See:

--- sam | Sci.Electronics.Repair FAQ Mirror:

Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs.

You can get them at any hardware store, they'll be in little plastic or aluminum cans a bit smaller than C batteries, you can open the can up fairly easily if you want and you'll find those glow bottles inside which you can mount exactly like the old one if desired, or you can get some starter sockets and use the twist-lock starters as-is.

Found them at lowes, broke apart of little can and ripped out the parts I needed, and that was the problem with the lights! Thanks all!

the

in

light

tip,

as

holds

DWW,