TDA2822H

Apr 13, 2009 13 Replies

Hi, Does anyone know of a supplier for this chip that will sell small quantities outside the USA? Am wanting the DIP-8 package version. thanks for your help, JEFF


Looks like a dual op-amp...?

formatting link

Michael

Looks like a dual op-amp...?

formatting link

** Did you read your own link at all ??

..... Phil

If you search digikey.com and mouser.com for TDA2822 (without the H) several interesting items come up.

formatting link

formatting link

I leave it up to you to decide whether you can live with SOIC (available now from Digikey) or if you want to wait until June for the DIP version at mouser.com.

Double-check the specs against the -H version you have.

Best wishes,

Michael

Thanks for the help, Michael and the other boys. Gee, the language is a bit colorful. JEFF

You're welcome. And welcome to sci.electronics.design.

What's the chip for, anyway? I'm guessing you have to repair a bunch of portable radios...? Otherwise you could go with different designs...

formatting link
formatting link
formatting link
(low-ish power but interesting)

Michael

What's the chip for, anyway? I'm guessing you have to repair a bunch of portable radios...?

** FYI - dickwad,

the chip is a favourite in small, plastic box PC speakers.

Go figure what an op-amp is sometime, too dickwad.

And don't come back.

..... Phil

And if you only need a few, and are in a hurry, you can buy SOIC to DIP 'converter' sockets.

George Herold

To reply directly remove the sj. from my email address. This is a spam jammer.

"Clearly this sort of language and abuse has no place on UseNet"

LOL

Best regards, Spehro Pefhany

"it\'s the network..." "The Journey is the reward" speff@interlog.com Info for manufacturers: http://www.trexon.com Embedded software/hardware/analog Info for designers: http://www.speff.com

You mentioned you're outside the US (New Zealand?) Ordering the part, plus SOIC-to-DIP adapter, plus shipping from the US to your destination, could be a good chunk of money. You sure it's not more economical to build from scratch, or just buy a new one?

For example, if parts + shipping =3D $20, and you could buy a new amp for $10, well, you'd be wasting time doing the repair route.

Michael

US&...

e

Yup Google "soic to dip adapter" and you'll find a bunch of suppliers.

George

If you think you can settle for the M suffix in the

8-pin DIP instead of the H (H apparently is a high temp part), I'm told that Ebay items that come up on this search use that chip:

"stereo speaker dock cradle"

US$6.98 delivered to the US, don't know about elsewhere. The typical origin is Hong Kong, so they should be able to get it to you. It's just a speaker dock for an MP3 player or ipod/iphone.

Or, you might find something that looks remarkably similar at your local store where miscellaneous electronic items are sold.

Good luck.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required