No, a prbs thing usually misses one code.
John
Power supply protection networks
Jun 16, 2009
172 Replies
or
component
had to
5%stuff
number
some
It could be 100 bits:
1) I believe nothing TI says in their specs (S/N, anyone?) 2) It isn't at least 8k samples/second so is of no use
With 40dB S/N? ;-)
Clearly, the truth is not within you. You did reply (without even bothering to snip).
Symmetrical is 'prettier'.
W
. | ,. w , "Some people are alive only because
\\|/ \\|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------
Jeez, you're showing your age there. ;^)
W
. | ,. w , "Some people are alive only because
\\|/ \\|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------
I was hoping someone might have the answer for that! Another of life's mysteries solved.
Thanks.
=20
=20
=20
Gee whiz, Phil. I was using 7 digit DMMs 25 years ago. Old tech now. And Fluke was selling 6-1/2 digit DMMs at the time, i trust that their accuracy was real. Of course warm up times were on the order of half a day (12 hours), easier to keep them running.
Funny, when considering your reply just above...
Thanks,
Fred.
Joe, count the bits.
Cheers
Phil Hobbs
Dr Philip C D Hobbs
Principal
ElectroOptical Innovations
55 Orchard Rd
Briarcliff Manor NY 10510
845-480-2058
hobbs at electrooptical dot net
http://electrooptical.net
Not so funny, since you're the one telling us that you could not care less, yet clearly lying.
hype--THIRTY_ONE_BITS?
=20
=20
=20
drifts,=20
put=20
=20
their=20
Since it was a decade counter 26 bits were used (one for signum) in the Flukes. The other used 30 at least. AND this tech was over 20 years ago. Getting 8-1/2 or 9-1/2 decimal digits may be technically feasible, but the measurement error sources are dominating the game at
6-1/2 digits already.
Yah. Try 22. Or you could try counting on your fingers and toes.
Cheers
Phil Hobbs
Dr Philip C D Hobbs
Principal
ElectroOptical Innovations
55 Orchard Rd
Briarcliff Manor NY 10510
845-480-2058
hobbs at electrooptical dot net
http://electrooptical.net
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required