Infrared Link for Audio?

May simply do that. Hate to waste it, but I have a 2.4GHz video link, purchased to demo a project... maybe I should just use it ;-)

...Jim Thompson

-- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | |

I think i would hack a TOSLink fiber optic to a "broadcast" version instead. It is digital and handles at least 5.1 already.

The creme de la creme of FM audio links is the synthesized Ramsey Kit and a old 1" Rack tuner. Ramsey tends to have the best bandwidth and low noise, in a pinch I have used it as a link for a outdoor show for

Steve Roberts

The creme de la creme of FM audio links is the synthesized Ramsey Kit and a old 1" Rack tuner. Ramsey tends to have the best bandwidth and low noise, in a pinch I have used it as a link for a outdoor show for

Steve Roberts

Wow! Looks nice! Is that legal? Or do I need a low-power license?

...Jim Thompson

depends on the resistor you install in the output stage, as built its part 15 compliant, and puts out a few milliwatts, which is more then enough to saturate a good sized ranch house with say 6" of wire. Its very vswr tolerant, so you can run it into a badly mismatched load without blowing the output stage, and we all know that the antenna and antenna height is what gets you range. put a 50 ohm smd resistor on the output, put it on top of teh stereo and have just the leakage, if your worried, the leakage will be enough :-)

Steve Roberts

Thanks!

...Jim Thompson

Oh, I took a look around the online catalog, the new one, the FM30 has a dac and a pin diode attenuator to let you set the power to a minimum. Its also about 50$ more.

Steve