Help: Where Can I find tuning forks for freq of 500~800 hz.

Hello Group?

I am looking for the components, tuning fork, frequency of 502.5,

532.5......802.5hz range for maritime radio beacons. If anyone share a information about, who makes, where can I order..., I will be appreciated very much.

Thanks, HWLEE

Reply to
cessnapilot
Loading thread data ...

Musical tuning forks may get you close for some of the frequencies. They should be available in frequencies 440Hz * 2^(n/12) where n is a whole number (positive, zero, or negtive -- within reason).

For example:

A is 440.00Hz A# is 466.16Hz B is 493.88Hz C is 523.25Hz C# is 554.37Hz and so on.

However, I'm having a hard time finding chromatic sets (separated by the

12th root of 2 ratios) that are anything wider than from 261.6Hz to 523.3Hz. Here's a link:

formatting link

You could probably trim them to get the exact frequency you wanted, but I'm not sure how well this would work.

Bob

Reply to
Bob

Just curious. Is there some reason you don't use an oscilloscope to determine the frequency rather than a tuning fork??

Reply to
Ken

Whether you mean Hz or kHz, wouldn't you be better off using DSP or some other signal processing method that's more compact (and precise) than a bunch of tuning forks?

What, exactly, are you trying to do?

--
Tim Wescott
Wescott Design Services
 Click to see the full signature
Reply to
Tim Wescott

That's interesting. I was reading "tuning fork" as in a frequency determining device. Don't some clocks (as in for reading time) use things referred to as "tuning forks" instead of crystals for keeping accurate time?

Michael

Reply to
Michael Black

Those frequencies look like old pager or tone squelch fregencies. Motorola, Bramco and Ledex made the "reeds", which were mecahnicaly tuned, frequency selective relays. A simpler system was used for RC control, years ago.

--
Service to my country? Been there, Done that, and I\'ve got my DD214 to
prove it.
 Click to see the full signature
Reply to
Michael A. Terrell

Can't help you there, I know nothing about fancy clocks. I only have the cheap ones that either use the 60 cycle method or a crystal oscillator.

Reply to
Ken

The Bulova Accutron used a tiny metal tuning fork with coils, in an oscillator.

formatting link

You might be thinking of "tuning fork" crystals, were the crystal itself is in the shape of a tuning fork - that's how they can fit a 32.768KHz crystal into a can about the size of a tic-tac.

Cheers! Rich

Reply to
Rich Grise

There are such things as tunable tuning forks. I have seen them demonstrated. Moveable weights on the tines change the frequency. Here is one example, although an expensive one:

formatting link

Al

Reply to
Al

Well, I guess if you need a machine to "align your brain waves", money is no object. ;-)

Cheers! Rich

Reply to
Rich Grise

Woowoowoowoowoowoowoowoowoo....

;-)

Al

Reply to
Al

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.