I am looking for some of that for a project but don't seem to be able to find a supplier anywhere, short of looking for PC microphones that have it and stripping does anyone know of a source, metal/plastic/rubber ok.
Thanks!
GooseNeck Material
Nov 26, 2004
6 Replies
Thanks! Will be ordering from across the ocean!
it
formatting link
Enter gooseneck
Regards,
Boris Mohar
Got Knock? - see: Viatrack Printed Circuit Designs
formatting link
formatting link
martin
Serious error. All shortcuts have disappeared. Screen. Mind. Both are blank.
Any idea who makes these?
Best regards, Spehro Pefhany
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Hi Jim,
If you need something very quickly before the order from the UK arrives check the next hardware store. In the lighting section they usually have several goose necked desk lamps at prices that can even be below what the goose neck alone would cost.
Once I desperately needed a telescope antenna. So I bought a little halogen desk lamp for about $15. Took it apart and, whoopdidou, I had two telescope antennas. Plus a transformer, a bulb and a spare power cord.
Regards, Joerg
formatting link
You could try a decent musical instrument shop. You know the kind of place that the musos/bands go to get their gear.
Alan
++++++++++++++++++++++++++++++++++++++++++ Jenal Communications Manufacturers and Suppliers of HF Selcall P O Box 1108, Morley, WA, 6943 Tel: +61 8 9370 5533 Fax +61 8 9467 6146 Web Site:
formatting link
Contact:
formatting link
++++++++++++++++++++++++++++++++++++++++++
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required