8 long x 4 wide x 1 deep, 18 compartment project box anyone?

If fixed dividers are ok

It's unclear if you mean 8 compartments or 8". Regardless, you may get some mileage out of this search:

Danke,

Beings removability was overlooked the first time, you may get even more mileage out of:

Danke,

For storing parts? Those are only useful if you don't have many parts.

I use coin envelopes in big plastic bins.

Depending on how you store them you might be better off getting something x 8" or 12" instead of 4".

Of course you can have what you want if you 3d print it in PETG.

NT

Thank you very much! They had everything else that i was looking for (to end a sentence a preposition with).

Thanx

The reference to Michaels is rather good. But a day late and a dollar short as they used to say in the Army..ordered thru McMasters.

Thanks.

Removable dividers = parts migrate between compartments, at least IME. They turn the part-storage problem into a map-coloring problem, since you have to ensure that no visually similar parts are stored in adjacent bins.

Two things I don't allow in the house: Duracell batteries and parts bins with removable dividers.

-- john, KE5FX

The drawers in my parts bins accommodate removable dividers. And a long time ago the dividers were actually used. But they were removed to make room for one or more 2x4x2mil clear bags per drawer. Depending up part size, each 2"x1.5"x5.5" drawer can hold up to half a dozen bags. You can easily see what's in the bag. You also avoid the problems you mention in your first paragraph.

Danke,