Been at this thing for a couple months and tonight I finally called it done. It's a little box that generates ambient drones on its own, no input from me. Arduino Nano running the brain, a couple of slide faders to shape the tone, three buttons to nudge it around, and a toggle to kill the output. Poured a concrete base for it becuase I wanted something with some heft, and the faceplate is frosted acrylic with an organic cutout so you can see the resistors and caps underneath. Looks way better than I expected. It's been droning on my desk for the last hour and every few minutes it wanders somewhere new. Sometimes it does a slow swell that sounds like a distant choir, sometimes it gets all wobbly. I mostly set the faders and listen. Honestly the hard part wasn't the sound, it was making it evolve without repeating itself. A few pseudo-random tweaks to the patch parameters each cycle did most of the work. Next up is tidying the code, throwing it on GitHub, and drawing the graphics for a little user manual so other people can build one. Might even sell a few finished units if there's interest. Anyway, back to staring at it. The drone is hypnotizing me.
Just finished my self-generating ambient synth and it's running right now
Nov 18, 2026
Last reply: 1 hour ago
4 Replies
Built something along the same lines last year, a drone box built around a Teensy with a walnut case and a heavy steel plate I salvaged from an old drawer slide bracket. I got lucky in that I made most of my mistakes early. The biggest one was wiring my controls to the source material instead of the process, so every fader move felt like interrupting it rather than shaping it. Repatched everything so the pots just steer the slow modulation and now it practically plays itself.
One thing that helped mine wander more, in case it saves you some coding: I put a second layer of really slow modulation on top of the random tweaks, like changes that only land every ten minutes or so. The random stuff kept it interesting minute to minute, but that slow layer made an hour of listening feel like a whole journey. Before I added it I noticed the same general vibe cycling back every few cycles, which I gather is the classic trap.
Mine runs off a phone charger into a small supply board, and I never let my partner talk me into shrinking the case. The extra volume does nothing useful but I love that it sits on the shelf like an instrument instead of a dongle. Post the code when you get to it, I'd like to see how you handled the patch evolution.
Mine went the other direction on the evolution problem. I never trusted random parameter jumps because mine kept producing moments I'd want to hold onto and then losing them. So I gave everythign slow drift instead, a handful of long cycle times somewhere in the four to eleven minute range, all slightly offset from each other so the combinations almost never line up the same way twice. It wanders less dramatically than yours probably does, but it never resets in a way that makes me notice the reset.
Mine's also nowhere near as handsome. No concrete base, just a bent aluminum plate from a project box and knobs pulled off a dead cassette deck. I keep telling myself the enclosure doesn't matter because I only look at it when I flip the power switch, but then I see builds like yours and start sketching faceplates at midnight, so maybe that's a lie.
One thing I'd flag for your GitHub version: document the noise floor. The hum level on my box changes depending on what else is on the desk circuit, and when people started building theirs they messaged me confused about why thier drones sounded dirtier than mine. A short note about powering it from a phone charger versus a laptop USB port would have saved a few back and forths. The staring at it part never wears off, for the record. Mine's been on for three days now.
That concrete base idea is doing something for me. I built mine into a wooden cigar box and the thing walks across the desk from the transformer hum alone, so I ended up sticking a book on top of it. If I ever rebuild I'm stealing the heft approach. Question on the output: are you running line level straight out of the Nano or did you need some gain on the way? Mine came out way too quiet into a mixer til I added a simple op amp stage, nearly drove me nuts figuring out it wasn't the code. Also curious how you're handling the audio itself, is it all synthesized on board or are there samples in there somewhere?
Update: tried the slow drift approach someone described here, long cycles instead of random jumps. Big improvement. It held a gorgeous chord for nearly ten minutes before wandering off. Also yes, output is line level through a simple attenuator, works fine straight into a mixer. Might add a small internal speaker trim pot for anyone running it into an amp.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required