And can I use it for something?
Laminated steel core:
On the other side, all the wires come out one side. They are grouped and labeled. |Orange wire labeled 0V |Brown 91V |Black 120V |White 105V (continuity between these 4)
|Brown 16V |White 0V |Brown 16V (continuity between these 3)
|White 8V |Red 0V |Black 8V
Sure, you can use it for anything you need 8, 16, or 32V for.
Usually, there is an AC input on the other side. Is that the 120 and 0 V connections?
Of course
120v mains primary, 2 secondaries 16-16 and 8-0-8v. Current as yet unknown, but a 4.5" cube must be what... 100w at a vague guess?
Would run a power amp, a bench PSU, can be sued to boost filament bulb efficiency, and who knows what else.
Could also be used as an audio output transformer if you weren't too worried about quality.
NT
Or even 24, 40 or 48v !! :~)
Arfa
Yes, althought you're then limited to the lowest current capacity of the windings, if you can see a small section of the winding you can guess as to the amps it can handle.
Or...it would probably make a passable door stop. If not heavy enough; a paperweight!
jak
Have something to add? Share your thoughts — no account required.
Ask the community — no account required