I've now added a preliminary schematic to the file, a number of the controls and inputs/outputs are not included.
- posted
15 years ago
I've now added a preliminary schematic to the file, a number of the controls and inputs/outputs are not included.
Why is there a pot stuck sideways there in the fourth shot, a troubleshooting aid? Ken
controls
'scope
That is one of the things a previous owner had done probably in 60s or 70s . He probably added the 2 Si diodes then. The genuine pots are very small and the one that should be there is missing replaced with that one , presumably the smallest he could find but too large to fit in place. He must have given up when the carrying strap broke and CRT cracked.
-- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on
controls
'scope
Error. The original is still in place but has a broken tag, but enough remains to measure resistance. The Al cased one is wired in , instead but is too big to replace the original.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.