1. Home
  2. Electronics Repair
  3. Reinstalling Sony 3 cd turntable tray alignment

Reinstalling Sony 3 cd turntable tray alignment

I have on the bench a Sony HCD-RX33 that is a 1998 production mini bookshelf system with the 3 tray carousel at the top. After replacing one of the clamper gears I can't seem to get it to do anything other than spin the carousel. No matter what position I choose for the thing it just spins round 4 or 5 times and gives up. I checked the shelves for a manual and am in disbelief that it isn't there so I ask you for help. I need the alignment instructions for the carousel tray. Any help would certainly be appreciated! Thanks in advance!

Reply to
Me
Loading thread data ...

As best as I recall, there is a mechanism underneath which either runs the tray in / out, or accomplishes the clamping, by means of motor reversal. In my experience, the metal plate / gear assy can have problems swinging back and forth. If it hangs, it might cause your problem. The parts I speak of are on the underneath side, on the right side as viewed when the front of the unit was towards you. (did that make sense?)

If you want to e-mail me directly:

snipped-for-privacy@labolgcbs.net

and reverse the domain name. I might be able to lift a graphic from the PDF for you.

Sony forbids me from distributing their manuals.

Mark Z.

Reply to
Mark D. Zacharias

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.