I bought a new TV (regular one not HDTV), and my rabbit ears will pick up the VHF (2-13), but not the UHF. They worked on my old TV (15 years old). The ears have three connections, one cable looking with a thin wire in the middle which was what I used on the other set. I tried connecting both of the other wire sets to see if one was UHF, but each time the VHF worked, but not the UHF. I checked in the manual, and they mentioned buying a combiner for the two sets of wires, and I checked at Radio Shack, but they were not sure if that would solve the problem. The big cable from the rabbits ears would appear to be a built-in combiner. I hardly ever watch the UHF, but was wondering if my rabbit ears are too old, and and there is a different electronic need or something.The manual mentioned some electronic settings 75 ohm?
Thanks
Tom