Ps36125

Mar 15, 2006 7 Replies

Hi,


I have a Proscan 36" TV, it's about 9yrs old. The unit was working fine in the morning. When I went to turn it on at night all I got was a clicking sound. Initially it clicked several times now it just does it once but never powers on.


I did remove the back to inspect for obvious damage and try to pinpoint the source of the clicking. The board "looks" good. I do not know part numbers or the correct jargon but there is a white square object/part from which a cable attaches to the tube, it has a little discoloration on top, but that's it. Unable to pinpoint the source of the click, and so far have taken no voltage readings, there is a small fuse by the power cord that is good.


Has anyone else had this problem and is there a probable cause?



I am new to this forum and appreciate any help.



lancelot



lancelot

There is nothing you can do but call a TV service shop and get an estimate. This is a CTC197 chassis and needs trouble shooting possibly bad IHVT and S/C HOT. May even be trouble in the SMPS sections.

IHVT = Flyback Transformer HOT = Horizontal Output Transistor SMPS = Switched Mode Power Supply.

Thanks for the help, was hoping this was something I could attempt repairing myself....

kip Wrote:

lancelot

I would guess that kip, after reading your original post, based his suggestion on an estimation that you probably do not have the background required to fix this yourself.

That's would I would conclude, and I'd make the same recommendation. If you really don't know what you're doing, and/or don't have the proper tools, you could do more harm than good (to the TV and to yourself!)

Regards,

- another Kip

Well I guess my 38 yrs as a CET and working factory service for RCA when they had factory service does not count. Not to mention I work on these 6 days a week. Get A Life Fella.

kip!

Read my post again.

Carefully, this time %^)

I was talking about the original poster, not you.

Ok Accept my apologizes I just didn't like the final line. kip

I didn't like entering it, either, just don't want to see anyone get hurt.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required