1. Home
  2. Electronics Repair
  3. Pioneer CDJ800 laser current check

Pioneer CDJ800 laser current check

Hi,

anyone know how to measure the laser current in the Pioneer CDJ800 Mk1? What is the generic method for measuring laser current, if there is one? Also, is it possible to simply replace the laser in the CDJ's, or does the firmware have to be recalibrated etc?

Here's the procedure for the CDJ800 Mk 2:

"LD current: 20 to 80mA : TYP : 40 to 50mA Measure both end of R249 on the MAIN Assy in the play state. There must be the value that divided the measured value with 23.5 Ohms within the numerical value mentioned above"

Cheers,

Gareth.

Reply to
Gareth Magennis
Loading thread data ...

Ah, just found that although the laser assembly is not the same, the Main PCB and measurement procedure is.

Reply to
Gareth Magennis

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.