philips AV switching to standby

Hi philips 32inch tubed tv weird problem - thought it had gone away, and now its back

turn on tv and its on fine, without sky turned on, so the picture is grey with no signal - this is usual. in the past i would turn on sky plus unit and signal would swith to av and tv as normal, also could go to other avs without any problem. Now, turn on tv, can sit there for ever without the tv turning off.

turn on sky from standby and the tv goes into standby and the red led on the tv blinks. also if i try other sources when its turning on dvd etc these might work if i am quick, after the picture is on, if i try to alter the av to another source, it goes into standby.

I remember this happening a year or two ago, when i had a tivo, and they sent down a patch that stopped it happening.

tivos gone now, and i havent altered the current configuration for some time.

any ideas

Reply to
Coach
Loading thread data ...

change over the scart/euroconnector leads and see if that helps. you could have a 5v switch voltage pin short to ground or something. scart leads are notorious for the pins bending or losing contact.

-B.

Reply to
b

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.