Evening, all.
I picked this up out of a neighbour's dustbin. When I turn it on at the wall socket, the fan on the mech spins briefly, and the motor at the back of the mech deck lifts and then lowers the back of the deck and the laser flicks on, but nothing else happen - no spindle motor rotation, no display, no drawer open/close (even after I've manually opened the drawer and then turned the player back on). The voltages on the PSU board look OK, so I'm wondering if part of the problem might be a couple of bad channels on a motor-drive IC. Contact cleaner doesn't seem to have had any impact.
Any help much appreciated.
Cheers, Jon.