Is it possible to eliminate (turn off) dead pixels in LCD monitors?

Nov 11, 2005 24 Replies

Similar story with plasma sets:

formatting link

Those interested should check the "Manufacturer's General Warranties and Dead Pixels Policies" link on the above page. Chances are you won't be getting a "perfect" screen for that premium price, folks.

I haven't yet come across a dead pixel on a plasma set, but then I haven't seen nearly as many of them as I have LCD displays of one sort or another.

Joe Leikhim K4SAT "The RFI-EMI-GUY" "Follow The Money"

I saw one on a Pioneer plasma set in a store a few years ago. It was bright green and flashed randomly. Andy Cuffe

snipped-for-privacy@psu.edu

TFTs actually work in the opposite way to what many people might think- an energised pixel goes black and a non-energised pixel is clear, ie lit. When a pixel is energised it becomes opaque, blocks out the backlight and appears black. If the fault was down to an open transistor at that pixel location then theoretically shorting out that transistor would cause the pixel to turn black. I don't know how that would be achieved though, it could be tricky!

If the lit pixel is caused by a break in continuity between the pixel and its associated transistor that connection would have to be remade somehow, and I expect that would be impossible or at least not technically and financially viable or otherwise TFT repair facilities would offer such services.

Dave

Dave

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required