Samsung S3C4510B

11 discussions on ElectronDepot about the Samsung S3C4510B: what owners asked, what went wrong, and what fixed it.

What owners report

помогите в выборе микросхемы plz.

Привет All!Hужна помощь в подборе подходящей ПЛИС или МК с небольшой избыточностьюна случай небольшого улучшения устройства....

Hvilken Pic ?

Hvilken Pic vil i anbefale, til hobby elektronik, jeg st=E5r nemli ogtripper mellem 16F84 og 18F8722, men er der en i vil mere anbefale,MVH Kevin

Looking for cheap ARM7 development platform

HiThe ARM7TDMI is embedded in so many devices; do you know of a consumerproduct that utilizes it, where I could attach a JTAG connector somehowand put uCLinux on it?Ideally it would be a product with TP Ethernet, such as a router, DSLmodem...

Looking for cheap ARM7 development platform

HiThe ARM7TDMI is embedded in so many devices; do you know of a consumerproduct that utilizes it, where I could attach a JTAG connector somehowand put uCLinux on it?Ideally it would be a product with TP Ethernet, such as a router, DSLmodem...

Ethernet on Embedded System

Hi, I recently posted asking about ethernet on eZ80 microprocessor. Isthere a better processor to use? I spoke with an engineer at Zilog,and it appears that working with the MAC layer directly is going to beextremely difficult. Are there...

SDRAM Initialization Sequence

I am using the s3c4510b mcu, is it necessary to initialize the SDRAM inthe bootup sequence or I can use the SDRAM directly after I set thespecial registers?If initialization of the SDRAM is required, what is the typicalsequence like in...

All discussions