NXP LPC1768

15 discussions on ElectronDepot about the NXP LPC1768: what owners asked, what went wrong, and what fixed it.

What owners report

analog failures

My experience is that we find a lot of bugs and documentation problems with the digital parts of mixed-signal chips. -- John Larkin Highland Technology, Inc picosecond timing precision measurement jlarkin att highlandtechnology...

really nice Rigol scope

4 channels, 1 GHz. This is really nice to drive and use. The displayis glorious.It comes with 6 probes, two of them 1 GHz resistive. And several ofthese:-- John Larkin Highland Technology, Incjlarkin at highlandtechnology dot...

Jakich ARMów używacie.

Witam,Jak w temacie, ciekawi mnie jakie ARMy są najczęściej używane przez konstruktorów elektroników w Polsce.P

An other Microchip screwup on teh 18F14K22

After waisting some huors to get SPI working with the PIC 18F14K22 connected toan ENC28J60 Ethernet cotroller,and finally grabbing the scope, I found it sort of always loses bit 0 in the SPI.So lookAnyways, I did the SPI bit banging in C...

LPC1768 USB hangup

We built a little picosecond pulse generator box with a USB interface.The USB is directly into an LPC1768 NXP ARM chip, and we're using theUSB stack and inf file that Code Red provided. It enumerates as aserial port. It's "unsupported",...

LPC1768 USB hangup

We built a little picosecond pulse generator box with a USB interface.The USB is directly into an LPC1768 NXP ARM chip, and we're using theUSB stack and inf file that Code Red provided. It enumerates as aserial port. It's "unsupported",...

All discussions