11 discussions on ElectronDepot about the Atmel AT91SAM9261: what owners asked, what went wrong, and what fixed it.
Hi,I've recently started development with a Philips LPC2103. I know Atmel has a site, which I found useful for AT91SAM stuff. I'm looking for suggestions or recommendations on websites/forums that discuss using the LPC21xx parts. I did...
Wtiam,Mam zamiar pobawić się ARM'ami (tak, wiem, słyszeliście taki wstęp już wiele razy ;)).Na naszym rynku są do kupienia sensowne płytki "rozwojowe" do zabawy z procesorami philipsa (LPC21xx) i atmela (AT91SAM7S).I moje okropne...
Looking at the data sheet for the AT91SAM9261, it says the back upsupply voltage range is 1.08 to 1.32 volts with a current of 2.5microAmps. This could be supplied by a watch battery except I have noidea how to regulate the voltage to this...
Hi, does anyone know how fast an ARM processor, specifically Atmel'sAT91SAM9261 can bit-bang its general-purpose ports?I'm trying to get speeds on the order of 3-6 MHz at a minimum. Theidea is to write to a DAC, turn the direction of the...
Does anyone have a current PC-lint configuration file (.lnt) to use with IAR Embedded workbench for ARM?Scott
I have to drive a TFT display with an ARM7 ST MCU (STR750 family).The application must show some color images (8 bit per color) on a 320x240 QVGA.The choosen MCU has up to 256KB internal flash and 16KB internal RAM.I plan to add one...