Do you have a question? Post it now! No Registration Necessary
June 24, 2006, 6:51 am

Hi, I m not sure whether this Portwell hardware is suitable to me.
I basically want to build a low power (and low cost) network gateway
which preferably have biuilt-in 2 x 100 MB/S ethernet cards, and support
large size of FlashDisc eg. 1GB.
Here is a reference:
http://www.portwell.com/embedded/peb-6530vl.htm
If this is other better choices, please advise.
Your suggestion is very appreciated.
Thanks
Sam
I basically want to build a low power (and low cost) network gateway
which preferably have biuilt-in 2 x 100 MB/S ethernet cards, and support
large size of FlashDisc eg. 1GB.
Here is a reference:
http://www.portwell.com/embedded/peb-6530vl.htm
If this is other better choices, please advise.
Your suggestion is very appreciated.
Thanks
Sam
Site Timeline
- » PCEngines WRAP 2.C - HTTP Redirector
- — Next thread in » Embedded Linux
-
- » DMA Broken Up on MPC8248
- — Previous thread in » Embedded Linux
-
- » Crosscompiling for ARM: reloc type R_ARM_ABS32 is not supported for PIC - ...
- — Newest thread in » Embedded Linux
-
- » Mała garażowa firma z produkcją urządz eń.
- — The site's Newest Thread. Posted in » Electronics (Polish)
-