I'm looking for a cheap watertight box about 10" long by 3.5" wide by
Thank you-
Hammond has several nice lines
Search on "nema enclosure" and "ip enclosure" for others.
If you're building the device and can fiddle with the layout, there's the old PVC pipe trick.
Any ordinary box,filled up with epoxy after the electronics have been completed??
Look up 'IP ratings'.
Graham
Long and Thin boxes are a bit thin on the ground. A while ago I needed one to go in a lighting column & the only thing I found was a diecast one from Rolec in their AluKOM range :
They also do some aimed at things like crane pendant controls which are in a long-thin format (conTrol range)
AutomationDirect.com has a variety of enclosures with a variety of NEMA ratings, for example:
HW-N4X932 9"x3"x2" $25.50, Non-metallic, NEMA 4X junction enclosure
I've purchased from AutomationDirect.com previously for a push-buton enclosure and I didn't have any problems with the transaction and was able to contact people by phone for questions.
Tupperware.
Jim
-- "It is the mark of an educated mind to be able to entertain a thought without accepting it." --Aristotle
Have something to add? Share your thoughts — no account required.
Ask the community — no account required