Hello,
>
> I am looking to do a LC or bank oscillator. I searched the internet I have
> not seen what I want.
> I just wanted a simple oscillator and a power supply that would just keep
> injecting the loss energy of the LC circuit. I have included a small
> schematic, but it do not work in my pspice simulation
>
> thanks in advance for your help
>
> ken
>
>
Since the minus input of the opamp is tied to the plus rail, the output of the opamp is going to be a fixed low dc level
Ok, well many circuit I have seen do not take advantage of the inductor discharge, and keeps cherging the capacitor from empty. I would like in my circuit to be able just to add the lost voltage to keep the oscillation going. In my circuit when the voltage falls below a certain point, it recharge the circuit.. but how do I know it is recharging the capacitor and that it is not being sent when the capacitor has just finish discharging. ( I think that if the circuit sends power to the capacitor when it has just discharge in the inductor, the frequency will jump a bit .. maybe I am wrong..)
Ken
"Dan Hollands" ha scritto nel messaggio news:Ip5Df.148428$ snipped-for-privacy@twister.nyroc.rr.com...
have
keep
Could you please explain what you desire in a more deeply way? LC oscillator may be of several type, the simplest topology you can build they are Colpitts and Hartley, I've simulated this type of oscillator some years ago with PSPice (Microsim release) without problem, just remember, in order to keep oscillation starting you've to add some noise generator into the oscillator loop (e.g. in series to one capacitors), a VPULSE sorce may be good, just a single pulse to force the system to oscillate.
Cheers Fabio
Not quite sure what you are trying to do but it sounds like you need to read up on oscillator design.
What you are describing sounds very much like feedback...
Have something to add? Share your thoughts — no account required.
Ask the community — no account required