1. Home
  2. General Electronics
  3. [AD] PIC DevelopmentBoard

[AD] PIC DevelopmentBoard

Allow me introduce the PrimeKit PIC Development Board II.

First, here is the link:

formatting link

or

formatting link

PrimeKit PIC DevBoard II is a development board for Microchip® PICmicro® micro-controllers, and programming of Microchip® PICmicro® microcontrollers can be learned, by exploring the 12C/Fxxx, 16C/Fxxx, and 18C/Fxxx families.

PrimeKit PIC DevBoard II configuration is done by Jumpers, that allow activation/deactivation of all peripherals. All peripherals that share the same micro-controller BUS, are in parallel. If in need of any outside component testing, the provided Proto-board may be used, as well as the flat-cable sockets. The Radio Transceiver, USB and Ethernet modules are optional, although they may be supplied with the PrimeKit PIC DevBoard II.

You may find this on the webpage, but here it goes

Peripherials included onboard:

Momentary switch buttons and 12 keys numeric keyboard;

16x2 chars LCD Display; Leds BUS and 7 segments HEX Displays; USART (Serial Port); USB (Universal Serial Bus); Ethernet port accessed by I²C ® BUS I²C ® , SPI® and CAN BUS; Radio Transceiver for 433.92MHz; Crystal Oscillator or external fixed/variable clock; Temperature Sensor accessed by 1-wire® technology; Triac for AC/DC power circuit switching; EEPROM Memory accessed by I²C ® technology; Real Time Clock accessed by I²C ® technology; Analogue Inputs to use with PIC's ADC's; Total access from outside to the micro-controller ports; External pulse input; ICD (In Circuit Debugger) - Step-by-step debugging; Proto-board for auxiliary circuit testing;
  • Compatible with RS232/USB Bootloader. *

Thanks very much for taking a moment to read this email. Antonio Sergio Sena

--------------------------------------------- Antonio Sergio Sena (Field Applications Engineer)

Primetec - Engenharia de Sistemas, Lda. Rua Porto Alegre, 9 - 1º Esq.

2780-031 Oeiras PORTUGAL

e-mail: snipped-for-privacy@primetec.pt WEB:

formatting link

.
Reply to
Antonio Sergio Sena
Loading thread data ...

They are $325 Euro, or $402 USD. Not in my lifetime my friend. 8o)

Bill @ GarberStreet Enterprizez };-) Web Site -

formatting link
Email - snipped-for-privacy@comXcast.net Remove - SPAM and X to contact me

"Antonio Sergio Sena" wrote in message news:HZp2c.2708$ snipped-for-privacy@news-binary.blueyonder.co.uk... : Allow me introduce the PrimeKit PIC Development Board II. : : First, here is the link: :

formatting link
: : or :
formatting link
: : PrimeKit PIC DevBoard II is a development board for Microchip® PICmicro® : micro-controllers, and programming of Microchip® PICmicro® microcontrollers : can be learned, by exploring the 12C/Fxxx, 16C/Fxxx, and

18C/Fxxx families. : : PrimeKit PIC DevBoard II configuration is done by Jumpers, that allow : activation/deactivation of all peripherals. All peripherals that share the : same micro-controller BUS, are in parallel. If in need of any outside : component testing, the provided Proto-board may be used, as well as the : flat-cable sockets. : The Radio Transceiver, USB and Ethernet modules are optional, although they : may be supplied with the PrimeKit PIC DevBoard II. : : You may find this on the webpage, but here it goes : : Peripherials included onboard: : : Momentary switch buttons and 12 keys numeric keyboard; : 16x2 chars LCD Display; : Leds BUS and 7 segments HEX Displays; : USART (Serial Port); : USB (Universal Serial Bus); : Ethernet port accessed by I²C ® : BUS I²C ® , SPI® and CAN BUS; : Radio Transceiver for 433.92MHz; : Crystal Oscillator or external fixed/variable clock; : Temperature Sensor accessed by 1-wire® technology; : Triac for AC/DC power circuit switching; : EEPROM Memory accessed by I²C ® technology; : Real Time Clock accessed by I²C ® technology; : Analogue Inputs to use with PIC's ADC's; : Total access from outside to the micro-controller ports; : External pulse input; : ICD (In Circuit Debugger) - Step-by-step debugging; : Proto-board for auxiliary circuit testing; : * Compatible with RS232/USB Bootloader. * : : : : Thanks very much for taking a moment to read this email. : Antonio Sergio Sena : : : : : --------------------------------------------- : Antonio Sergio Sena : (Field Applications Engineer) : : Primetec - Engenharia de Sistemas, Lda. : Rua Porto Alegre, 9 - 1º Esq. : 2780-031 Oeiras : PORTUGAL : : e-mail: snipped-for-privacy@primetec.pt : WEB:
formatting link
: : : : : : : : . : : 
--
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.593 / Virus Database: 376 - Release Date: 2/22/04
Reply to
Bill Garber

Hiya!

YEah, but to be fair, there looks like a lot of useful widgets on that board....?

Yours, Mark.

Bill Garber wrote:

Reply to
Mark (UK)

Very true, and although I agree, I believe there are less complex and less expensive proto boards out there for developing those same PICs.

Bill @ GarberStreet Enterprizez };-) Web Site -

formatting link
Email - snipped-for-privacy@comXcast.net Remove - SPAM and X to contact me

--
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.593 / Virus Database: 376 - Release Date: 2/20/04
Reply to
Bill Garber

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.